Fast and durable shine.

GEM is a thermoplastic floor finish intended for lighter traffic floors. It gives a clear and slip-resistant coating for all durable floors including vinyl tile, asphalt tile, terrazzo, concrete, linoleum, marmoleum, and sealed wood.

GEM responds exceptionally well to a maintenance program that includes spray-buffing.

DIRECTIONS FOR USE:
1. Strip old floor finishes with Big Bang.
2. Neutralize the floor with Nacid and rinse with clear water. Allow the floor to dry thoroughly.
3. Apply a generous and uniform coat of GEM. If the floor surface is very rough due to wear, one or more coats of Base Coat may be applied first.
4. Allow 45-60 minutes, or until the coating is dry to the touch. When humidity is high and/or the room temperature is low, additional dry time should be allowed.
5. Apply subsequent coats in the same way. Apply no more than four coats at a time.

MAINTENANCE:
Dust mop often to remove dry, abrasive soil. Wash the floor with Extender in cool water. Spray-buff where necessary.
 

SDS